|
|
|
|
Selected Refereed Publications:
DeVallance, D. B., J. W. Funck, R. L. Leichti and J. E. Reeb. 2007. Fracture properties of Douglas-fir plywood gluebond specimens. ASTM Journal of Testing and Evaluation. (Submitted).
Baker, E. S., J. E. Reeb, W. F. Reiter, C. C. Brunner and J. W. Funck. 2007. Investigating important parameters after removing part families from a value-added wood products process. Forest Products Journal. (Submitted).
Nicholls, D. L., J. W. Funck, C. C. Brunner and J. E. Reeb. 2007. Influence of edging practices on cutting yields of Alaska birch lumber. Forest Products Journal. (Submitted).
Leavengood, S. A., J. W. Funck and J. E. Reeb. 2007. Face veneer checking in maple plywood. Forest Products Journal. (Submitted).
Baker, E. S., J. E. Reeb, W. F. Reiter, J. W. Funck and C. C. Brunner. 2007. Simulating cell manufacturing of selected part families in a value-added facility. Forest Products Journal. (Submitted).
Salichon, M. C., C. C. Brunner, O. J. Pinon, J. E. Reeb and J. W. Funck. 2007. Using simulation to predict and improve sawmill production when converting to a smaller-diameter log supply. Forest Products Journal. (Submitted).
DeVallance, D. B., J. W. Funck and J. E. Reeb. 2007. Douglas-fir plywood glue-bond quality as influenced by veneer roughness, lathe checks and annual ring characteristics. Forest Products Journal 57(1/2):21-28.
DeVallance, D. B., J. W. Funck and J. E. Reeb. 2005. Influence of several preparation conditions on plywood glue-bond quality test results. Forest Products Journal 56(2):47-50.
Liu, Y. C., C. C. Brunner, J. E. Reeb, W. F. Reiter and J. W. Funck. 2005. The durability of serpentine-end-matched joints during veneer slicing. Forest Products Journal 55(7/8):63-66.
Neese, J. L., J. E. Reeb and J. W. Funck. 2004. Relating traditional surface roughness measures to glue bond quality. Forest Products Journal 54(1):67-73.
Reeb, J. E. 2003. Simulating an extra grader in a sawmill. Forest Products Journal 53(11/12):81-84.
|
|
|
|
